Custom Fitted Tablecloth | 4 Sided Closed Back with Slit
Product Description
Custom Fitted Tablecloth | 4 Sided Closed Back with Slit
A Fully Enclosed Fitted Cover with One Discreet Access Point
The 4 Sided Closed Back with Slit gives you all four sides fully boxed and enclosed — with a single vertical slit cut into the center of the back panel. From the front and sides, the cover looks completely closed and formally fitted. From the back, there’s a single opening that staff can reach through quickly without removing the cover or disrupting the branded display.
It’s a middle ground that most buyers don’t know exists until they need it: the full appearance of a closed back with a single practical access point for one person to use throughout the event.
Starting at $145.00
Slit vs. Other Back Access Styles — Where This One Fits
| Configuration | Access | Appearance | Best when |
|---|---|---|---|
| 3 Sided Open Back | Full, unrestricted | Open back visible | Table against a wall, frequent access needed |
| 4 Sided Closed Back | None without removing cover | Fully closed all sides | Nothing needs accessing during the event |
| 4 Sided Closed Back with Slit | Single center opening | Fully closed appearance | One person needs occasional access |
| 4 Sided Closed Back with Slits | Multiple openings | Fully closed appearance | Two or more staff need separate access |
| 4 Sided Closed Back with Velcro | Full panel opens flat | Fully closed when sealed | Frequent restocking from a fully open back panel |
| 4 Sided Closed Back with Zipper | Zipper-controlled access | Fully closed when zipped | Secure access with a clean closure |
The single slit suits setups where one person occasionally needs to retrieve something from below the table — a bag, a box of materials, a spare device — without the cost or complexity of a zipper or velcro closure.
Configure Your Tablecloth
Back Coverage
Preselected: 4 Sided Closed Back with Slit
All four sides fully boxed and enclosed. A single vertical slit positioned at the center of the back panel — closed appearance from the front and sides, single access point at the back.
Step 1 Choose Your Size
| Size | Best for |
|---|---|
| 4FT (48”L x 30″W x 29″H) | Small formal tables with occasional under-table access |
| 5FT (60”L x 30″W x 29″H) | Standard conference and trade show tables — most common for this configuration |
| 6FT (72”L x 30″W x 29″H) | Longer formal tables with a single-staff access requirement |
| 8FT (96”L x 30″W x 29″H) | Large formal tables where one staff member manages under-table access |
| Custom Size | Non-standard widths, counter-height, or bar-height tables |
Step 3 Choose Your Material
| Material | Best for |
|---|---|
| 300D Poly | Indoor formal and corporate setups |
| 300D Flame Retardant Poly | Large venue compliance — recommended for convention and public event spaces |
| 300D Liquid Repellent Poly | Setups where liquid handling occurs alongside occasional access needs |
| 300D RPET Recycled Poly | Sustainability-positioned brands needing practical access with eco credentials |
Step 3 Choose Your Artwork Printing
| Print Options | How it works with Back Slit |
|---|---|
| Front Only | Front panel branded — remaining panels in base fabric color |
| Front + Sides | Front and both sides printed — back panel in base fabric color with slit |
| Front + Back + Sides | All four panels printed — slit sits within the printed back panel design |
| All Over Print | Full edge-to-edge print — slit integrated into the all-over design |
When printing the back panel (Front + Back + Sides or All Over Print), the slit is positioned at the center of the back panel and sits within the printed design. If you’d prefer the slit positioned away from a specific design element, note this in the order comments and we’ll account for it during proofing.
Where This Configuration Works Best
Solo-staffed booths — One person running a table alone needs to occasionally reach underneath for materials without leaving the front of the table unattended. A single slit lets them reach through from behind without stepping around or removing the cover.
Speaker and presenter tables — Conference speakers and panelists sometimes store notes, devices, or water below the table during a session. A single slit provides discreet access without altering the formal appearance of the table from the audience’s perspective.
Formal information desks — Government, university, and institutional information tables that maintain a formal front-facing appearance while allowing staff a single access point for stored materials.
Catered event tables with occasional access — Formal catering setups where staff primarily work at the front of the table but occasionally need to retrieve items stored below.
Why Buyers Choose This Configuration
- Fully closed appearance from every audience-facing angle
- Single center slit — practical access without a closure mechanism to operate
- Simpler and lower cost than zipper or velcro options for single-person access needs
- Free proof before production
- Wrong size or fit? See our remake/return policy
Specifications
| Tablecloth Size | 4 FT, 5 FT, 6 FT, 8 FT |
|---|---|
| Select Color | Black (Pantone Black C), White, Navy (Pantone 2765 C), Royal Blue (Pantone 286 C), Red (Pantone 186 C), Forest Green (Pantone 3435 C), Medium Gray (Pantone Cool Gray 8 C), Charcoal (Pantone Cool Gray 11 C), Silver (Pantone 877 C), Kelly Green (Pantone 347 C), Brown (Pantone 469 C), Burgundy (Pantone 209 C), Hot Pink (Pantone 219 C), Lime Green (Pantone 375 C), Maroon (Pantone 202 C), Orange (Pantone 172 C), Purple (Pantone 268 C), Sky Blue (Pantone 2905 C), Yellow Gold (Pantone 116 C), Teal (Pantone 3145 C) |
| Fitted Material | 300D Poly, 300D Flame Retardant Poly, 300D Liquid Repellent Poly, 300D RPET Recycled Poly |
| Artwork Printing | ALL OVER PRINT, FRONT, FRONT + BACK + SIDES, FRONT + SIDES |
Customer Reviews
- Upload PNG, JPG, PDF, AI, EPS, or SVG artwork up to 25MB.
- Use high-resolution artwork and include bleed where the design reaches the edge.
- A production proof can be reviewed before printing.
How wide is the slit?
The slit runs vertically at the center of the back panel. It's sized to allow one adult hand and arm to reach through comfortably. It doesn't open wider than a natural arm's reach — it sits closed-looking from a distance.
Does the slit show from the front?
No. The slit is on the back panel only, positioned at the center. From the front and sides, the cover looks identical to a fully closed back.
What if two staff members need access?
If two or more staff need separate back access points, the 4 Sided Closed Back with Slits (multiple openings) is a better fit — see that page.
How do I clean it?
Machine wash gentle cycle or cold hand wash. No bleach or dry cleaning. Steam or low-heat iron after washing.
How long until I receive my order?
Standard turnaround is 6–8 days from proof approval, including shipping. Plan your order with your event date in mind.
Our Works
See how our custom prints have helped businesses and events stand out. Real projects delivered to satisfied customers.
Personalized Tablecloth with Logo
Custom Color Tablecloths for Business & Personal Events
Custom Printed Tablecloth with Business Logo
4 Ft Custom Fitted Tablecloth with Logo
Reviews
There are no reviews yet.